The hotspot should start with “4GEE-WIFI”. Wait until the WiFi and network lights on the front of the device turn blue, then search for WiFi networks. You don’t need to charge the device beforehand – the battery ships with some charge. To turn on the 4GEE WiFi Mini, hold down the power button, which is at the top of the device, for about five seconds. Reattach the back cover, clipping it into place along all four edges. Then, match them up with the four gold-coloured connectors inside the device.Īt this point, you can slide the battery into place. To see which way it goes, look for the four gold-coloured connectors on the side of the battery. Now that the SIM card is in place, you can insert the battery into the device. Then, push it down, and slide it left, under the metal enclosure. Hold onto the SIM, facing with the EE logo upwards, and with the cut-out corner at the bottom-left. The SIM card can be a bit tricky to get out, but don’t worry about bending the larger SIM, since you won’t need to use it. You want the nano SIM card, which is the smallest one. To do this, grab the punch-out card supplied by EE, and remove the SIM. Since the battery goes on top of the SIM card, you’ll need to insert the SIM card first. Slide your fingernail under this notch, and you will be able to unclip the back cover from the MiFi device. There is a slight notch on the corner of the device, where you can pull the cover open from. The first thing you need to do is remove the back cover from the mobile WiFi device, so you can install the SIM card and battery. You can watch this setup tutorial as a video if you would prefer. Setting up the device and getting online is a simple four-step process.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |